How to make Plaid - 1 Basic Plaid
Posted by Claire Brennan on July 21, 2010.
So, I know tons of you have the plaid-maker stamps, I know this because I ship them out LOL! The plaid maker stamps are fabulous for making all sorts of plaid and stripey backgrounds just like the one you see in today's card. I love making plaid. I love everything about it, choosing the colours, the therapy of some nice repetitive stamping, the unique finished pattern and the look of it on a card or project.
I'm going to start a wee series of blog posts on how to get the
best from your background stamps, starting with plaid.
I used the narrower plaid-maker stamp from Pic-nic patterns and the sawtooth border from Vintage Labels no3
Getting a good impression
apologies for the poor photography, I am light box shopping as we speak...
So let's start at the start and make sure that everyone is getting a proper impression. Large stamps of any kind can be prone to less than perfect impressions. The first time I stamped with a border stamp I got a big 'hole' in the centre. I remember thinking that maybe the clear block I was using was perhaps bowed, so I stuck the stamp to the other side and tried again, same problem, maybe it was the table, I tried stamping on another surface but the result was not what I thought it should be.
I went out and bought new blocks and tried many other
surfaces and then I found a piece of advice somewhere, I don't remember
where, but it was so simple and an instant cure. Use foam. Lightbulb
A thin piece of foam, fun foam, upturned mouse mat, something with a little give in it. Pop it under the card/paper you are stamping on and, hey presto, the problem disappears.
is how a border stamp might stamp on card which is laid onto a table
surface, you can see bits have not stamped evenly, gaps are a disaster
in a stamp such as this.
Below, a piece of fun foam set under the cardstock, the stamp is stamped again with an even pressure all over and the impression is perfect. These days I stamp nothing without the foam, not even a teeny tiny sentiment, it seems to improve the quality of every impression from every type of stamp I have, wood mounted red rubber, clear stamps, everything. Try it, you'll like it.
A simple plaid
Now, onto the backgrounds, I will start with a very simple plaid. I have to admit I usually eyeball it and live with slight irregularities but If I'm making something special I might mark a few guides. I have a quilting ruler which I find invaluable, but any old ruler will do.
I'm using the narrower of the two plaid maker stamps from pic-nic patterns for this example, it is just under 3/4 inch wide. I
just set the ruler down on the cardstock, trying to keep it roughly
aligned with the edge of the card, but not being too fussy. Because my
ruler is so broad I can just make little marks down the edge of the
ruler on both sides, I make my marks exactly an inch apart. my stamp is
just under 3/4 inches wide and i want a little space between impressions
to help the pattern work.
If I take the ruler away you can see that there are two parallel rows of marks. It is very important that the rows are parallel so if you are not using a quilting ruler such as mine, you might need to take a bit of care to make sure your two rows of marks are parallel.
I begin stamping my plaid, for this example i use two colours of ink, a paler and a darker colour, but imagine the possibilities of 3 colours or more!
Using the paler ink, I stamp my fist impression just under
the first two pencil marks. I leave a space under the second two pencil
marks and stamp again under the third two pencil marks. Leave another
space under the 4th and stamp again under the 5th pair of pencil marks.
Now, I take the page and turn it round slightly so that my stamped images are running up and down instead of side to side. I mark another set of pencil marks along the stamped images.
stamp another impression, just like I did before, just under the new
pencil marks again I leave spaces under the second and 4th sets of
You can really see the plaid coming together now and it's easy to just fill in the blanks, the pencil marks are still there to guide you if you don't like to eyeball it.
It's time to use the darker ink now and stamp an impression in between the first two paler impressions.
Stamp another two dark impressions under the 4th and 6th pencil marks and turn the page around again, you plaid should look something like this:
Stamp another dark ink impression under the 2nd set of marks and you can clearly see now the pattern of the plaid, it really is so simple and once you have done this once or twice it will be so much easier to plan you pattern that you may not need pencil marks at all.
With all of the spaces filled in, your plaid will resemble this one.
For my card above, I cut a square out of the plaid to the size required and sponged the edges with the paler shade of ink.
There are a stack of variations of plaid possible with these stamps and I hope to show you more in these posts, as well as a few other types of background stamps, I do hope folks find these useful!
Hope it tickles!